In daily life, some car owners will add some electrical equipment according to their own interests or the nature of the car, but the car circuit design can not be considered comprehensive, that is to say, the original circuit left users with limited wiring points and circuit load space. Therefore, pay attention to this point when adding electrical equipment, otherwise the electrical equipment will be damaged slightly and the fire will be caused seriously. So, what should we pay attention to when adding electrical equipment to the car? The editor of Jinan Audi automobile maintenance company will introduce it to you.

　　其實只要我們注意以下幾點，就可以放心，輕松上路:

　　In fact, as long as we pay attention to the following points, we can rest assured and go on the road easily:

　　一、增加的電氣設備必須是專門為車輛使用和特殊用途設計的。所有的技術參數都經過了廠家的考慮。除非你是專家，否則，還是保險好一點，否則，什么額定電壓、電流、干擾、穩定性夠你頭疼的。

　　1、 The added electrical equipment must be specially designed for vehicle use and special purpose. All technical parameters have been considered by the manufacturer. Unless you are an expert, it is better to be safe. Otherwise, what's the rated voltage, current, interference and stability.

　　二、找到熟悉汽車電路的汽車維修站人員進行安裝布線。

　　2、 Find the maintenance station personnel who are familiar with automobile circuit to install and wire.

　　汽車維修站的技術人員受過專門的培訓，對汽車電流非常熟悉。由他們安裝，為用戶保留哪些點數;其中保險絲容量較大，且保護用電器較少，取電安全;哪些點沒有熔斷器保護，不能連接;他們清楚地知道他們對賽道做了什么。在這方面，有些教訓是需要我們注意的，有些用戶的車著火了，經過檢查，發現他們加的電線不規范，有些保險絲沒有通過保護。

　　The technicians of the automobile maintenance station have received special training and are very familiar with the automobile current. Which points are reserved for users by their installation; which points have larger fuse capacity, less protection appliances and safe power supply; which points can not be connected without fuse protection; they clearly know what they have done to the track. In this respect, we need to pay attention to some lessons. Some users' cars are on fire. After inspection, it is found that the wires they add are not standard, and some fuses are not protected.

　　三、如果必須安裝，一定要找到相應的電路圖配合您的車輛，請有經驗的技術人員安裝布線。

　　3、 If it is necessary to install, be sure to find the corresponding circuit diagram to match your vehicle, and ask experienced technicians to install the wiring.

　　現代汽車的電路設計，布局越來越復雜，加上電器配件必須標準化，找一個能看懂電路圖的人，算出電源點在哪里，通過哪個保險絲，保險絲的容量是多少。這樣做的目的是既要保證安全，又要避免影響原電路。

　　The circuit design and layout of modern cars are becoming more and more complex. In addition, the electrical accessories must be standardized. Find a person who can understand the circuit diagram, and figure out where the power point is, which fuse to pass through, and what the capacity of the fuse is. The purpose of this is to ensure the safety and avoid affecting the original circuit.

　　四、寧可多花錢，也要使用專用的線束連接線束接頭、卡、熱縮管，以保證線束和接頭固定可靠、密封良好。

　　4、 It is better to spend more money, but also use special wire harness to connect wire harness connector, card and heat shrinkable tube, so as to ensure that the wire harness and connector are fixed reliably and sealed well.

　　汽車的運行環境是非常糟糕的,連接不強,密封不好(比如只使用電子膠粘包裝),在崎嶇不平的,高溫、潮濕的環境容易折斷或脫落,導致短路,損壞電氣設備,甚至引起火災。

　　The running environment of the car is very bad, the connection is not strong, and the sealing is not good (for example, only using electronic adhesive packaging). It is easy to break or fall off in rugged, high temperature and humid environment, resulting in short circuit, damage to electrical equipment, and even fire.

　　以上是濟南奧迪汽車維修公司小編為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.junwumy.comThe above is the relevant content introduced by Jinan Audi automobile maintenance company. To learn more, please visit the website: http://www.lutongqixu.com